Status feedback
The status feedback is available for the electromechanical multi-point lock type EB or CB.
The multi-point lock queries different statuses. A status feedback on external devices are possible due to these status queries.
The possible status queries are adjustable via the menu.
For the status feedback, the connection of a relay to terminal 7 is necessary. The contact type of the relay is adjustable as locking bolt or as opener. When the set status is achieved, an output signal is emitted via terminal 7 and the connected relay transmits a signal to the externally connected device (e. g. alarm system).
The following status queries are possible:
Function | Status request |
|---|---|
A | The door is closed and locked. |
B | In day mode: the door is closed. In night mode: the door is closed and locked. |
C | The latch is retracted. |
D | Active error The latch is retracted. The multi-point lock is in the locking process or in the unlocking process. The door is closed and locked. The door is closed and not locked. |
E | The door is released. |
F | No active error |