Restoration of WIFI connection

Menu level 1

Menu level 2

Menu level 1

Menu level 2

value

WLAN Reset
(Only useable with coupled SI-BUS and WIFI-capable device)

WPS mode
(Only useable with coupled SI-BUS and WIFI-capable device)

Info mode
(Only useable with coupled SI-BUS and WIFI-capable device)

The "System services" menu can be retrieved up to 30 minutes following the system start. When the time has expired, disconnect the device from the supply voltage and reconnect.

Prerequisites

  1. The electromechanical multi-point lock is coupled with a WLAN-capable device.
    You can find information on coupling in chapter Coupling SI BUS devices.
  2. The status LED lights up green.
  3. The menu LED button lights up white in daytime mode or blue in night mode.
  1. Press the menu LED button if no LEDs light up.
  2. To change to menu level 1, press and hold down the menu LED button for 8 seconds until it light up magenta and emits an acoustic signal.
  3. Press the menu LED button until it lights up red to enter the "WLAN" menu.
  4. Press the menu LED button 5x for versions EA or CA.
  5. Press the LED button 7x for versions EB or CB.
  6. Press the menu LED button 7x.
  7. To change to menu level 2, press and hold down the menu LED button for 3 seconds until it flashes red and white.
  8. Hold down the menu LED button for 3 seconds.
    • The prerequisite is created to connect the electromechanical multi-point lock to the home network.
  9. Download the SIEGENIA Comfort app.