Teach in magnetic sensor
Menu level 1 | Menu level 2 |
|---|---|
 | |
Menu level 1 | Menu level 2 | value |
|---|---|---|
 |  | Restart the device |
 | Default setting | |
 | Software version | |
 | Teach in magnetic sensor | |
 | Reference run |
Prerequisites
- The status LED lights up green.
- The LED button lights up white in day mode or blue in night mode.
- Press the LED button if no LEDs light up.
- To change to menu level 1, press and hold down the LED button for 8 seconds until it light up magenta and emits an acoustic signal.
- Press the LED button until it lights up light blue to proceed to the "Device services" menu.
- Press the LED button 3x for versions EA or CA.
- Press the LED button 5x for versions EB or CB.
- To change to menu level 2, press and hold down the LED button for 3 seconds.
- Press the LED button 3x until it flashes light blue and red to teach in the magnetic sensor.
- Hold down LED button for 3 seconds.
- An acoustic signal will sound for approx. 4 s (alternating tone). A continuous tone will follow.
- Close the door.
- The magnetic sensor is taught in. This process takes some seconds to complete. After a successful teach in the locking elements move to the locking position and an acoustic signal is emitted.