Reset to factory settings

Menu level 1

Menu level 2

Menu level 1

Menu level 2

value

Couple devices

Separate devices

Unlock ACS
(can only be used with coupled SI-BUS and WIFI-capable device)

Default settings

WIFI on
(Only useable with coupled SI-BUS and WIFI-capable device)

WIFI off
(Only useable with coupled SI-BUS and WIFI-capable device)

Prerequisites

  1. The status LED lights up green.
  2. The LED button lights up white in day mode or blue in night mode.
  1. Press the LED button if no LEDs light up.
  2. To change to menu level 1, press and hold down the LED button for 8 seconds until it light up magenta and emits an acoustic signal.
  3. Press the LED button until it lights up light red to enter the "System services" menu.
  4. Press the LED button 4x for versions EA or CA.
  5. Press the LED button 6x for versions EB or CB.
  6. To change to menu level 2, press and hold down the LED button for 3 seconds.
  7. To rest the drive to factory, press the LED button 3x until it flashes light red ad red.
  8. Hold down LED button for 3 seconds.
  1. All device couplings are reset.
  2. The settings in the user administration are reset.
  3. All devices and system names are reset.
  4. The WIFI configuration is reset.
  5. The log entries are deleted.
  6. The keyless settings are reset.
  7. The menu functions are reset to their default settings.