Installing the smart window handle

  1. Rotate the veneer cap through 90°.
  2. Measure the diameter of the holes.
  3. If the holes are Ø 12 mm, slide the retainer rings onto the fixing pins.
  4. Determine the appropriate screw length. To do so, hold a folding rule against the window hardware and read off the measurement as far as the frame edge.
  5. Position the window handle on the window sash.

  6. CAUTION

    caution

    Risk of injury due to window handle falling out

    The window handle can fall out, causing bruises or fractures to toes and feet.

    1. Hold the window handle securely and screw into place.
  7. Fix the window handle to the window sash using the screws supplied.
  8. Rotate the veneer cap through 90°.
  9. Move the window handle into the locking position.

Teaching in the smart window handle