Status LED

Action		Description
Pull the battery earth contact out of the battery compartment	The status LED lights up red for 2 s	The sensor is ready for operation.
	The status LED lights up red 2x for 2 s	The sensor is ready for operation and the magnet is within the sensor's range.
Insert the battery	The status LED lights up red for 2 s	The sensor is ready for operation.
Insert the battery	The status LED lights up red 2x for 2 s	The sensor is ready for operation and the magnet is within the sensor's range.
Teaching in the sensor	The status LED flashes red 5x, goes out for 10 s and flashes red again 5x	The calibration was successfully completed.
Teaching in the sensor	The status LED flashes red rapidly for 10 s	The calibration was terminated.
Battery monitoring	The status LED flashes red 3 times every 5 s	The battery status is critical.
Perform a factory reset	The status LED flashes red 5x	The factory reset was successfully completed.
Perform a factory reset	The status LED lights up red for 2 s	The factory reset was terminated.