Mounting sensor and magnet

Use the sensor and the loose magnet for window sashes with milled striker plates.


  1. Clean the window sash and the frame at the installation position. The installation position must be dry, dust-free and grease-free.
  2. Remove the magnet from the slider.
  3. Glue the magnet adhesive pad to the magnet and press for at least 5 seconds.
  4. Glue the magnet laterally to the window sash and press for at least 5 seconds.
  5. Glue the sensor adhesive pad to the sensor and press for at least 5 seconds.
  6. With closed window sash, glue the sensor directly under the magnet to the frame and press for at least 5 seconds.

Teaching in the smart sensor