Preparing for installation

FH (mm)

Intended use

Number

< 2300

  • Private building without door closer

2

  • Private building with door closer
  • Public building
  • Industrial building

3

2300 – 2809

  • Private building without door closer

3

  • Private building with door closer
  • Public building
  • Industrial building

4

  1. Drill and mill the door leaf and door frame according to the dimensions and general tolerances defined in ISO 2768.
  2. Clean out routed pockets after milling, removing any splinters.
  3. Before installing the product, check the dimensional accuracy of the door leaf and the door frame. Do not install the product in event of warping or damage.
  4. Check the product for damage. Do not install the product if it is bent or damaged.
  5. Adhere to the producer's specifications regarding the minimum distance between the opening restrictor and the door hinge.
  6. If there are no fixing instructions, contact the producer.