DIN direction left, inward opening or DIN direction right, outward opening

Prerequisite

  1. All the hardware required to make the door function is installed on the locking side.
  1. Take the weight of the door leaf.
  2. Loosen the clamping screws and unscrew a maximum of one thread.
  3. Adjust the closing pressure using the adjusting screws.
    • Turning the adjusting screws clockwise will reduce the closing pressure.
    • Turning the adjusting screws anti-clockwise will increase the closing pressure.
  4. Tighten the clamping screws.Tighten the clamping screws.per hand