Screwing the multi-point lock into place

NOTICE

notice

Material damage due to ingressing liquid

An ingress of liquid into the drive can lead to short circuit.

  1. Mount the cover cap to protect against ingressing liquid.
  2. Observe the IP protection class.

Prerequisite

  1. The cables are routed through the door leaf.
  1. Connect the cable to the drive. If necessary, mount the cover cap to the electrical connection of the drive.
  2. Guide the cable into the routed pocket avoiding any kinks.
  3. Insert the multi-point lock in the milled door leaf.
  4. Adjust the multi-point lock so that the handle spindle is centred to the hole.
  5. Screw the multi-point lock to the door leaf.