Change DIN orientation of the main lock latch

  1. Compare the DIN orientation of the door with the latch and change over the latch if necessary.
  2. Insert the screwdriver through the hole at the rear of the gear box.
  3. Loosen the locking screw of the latch shaft and remove the latch.
  4. Turn the latch by 180° and press into the gear box.
  5. Tighten the locking screw of the latch shaft with the screwdriver.
  6. Press the latch into the gear box several times.
  7. Check that the latch moves smoothly and independently.